12 cd vs bs series 2 000 - 3 000h at 85c standard 85c item characteristics operating temperature range (c) -40 ~ +85 voltage range (v) 4 ~ 100 capacitance range (f) 0,1 ~ 2 200 capacitance tolerance (20c, 120hz) 20% leakage current (a) after 2 minutes at 20c application of rated voltage, leakage current is not more than 0,01cv or 3, wichever is greater . c: nominal capacitance (f) v: rated voltage (v) dissipation factor (20c, 120hz) rated voltage (v) 6, 10 16 2 0 6 100 tan (max) 0,38 0,28 0,22 0,18 0,14 0,12 0,10 stability at low temperature (impedance ratio at 120hz) rated voltage (v) 6, 10 16 2 0 6 100 z -25c / z +20c 7 3 2 z -40c / z +20c 15 8 6 4 3 resistance to soldering heat after refow soldering according to refow soldering condition and restored at room temperature, they meet the requirements listed at right. capacitance change within 10% of initial value tan initial specifed value or less leakage current initial specifed value or less useful life load life endurance test shelf life lifetime ? 6 : 2 000h ? 8 : 3 000h 2 000h ? 6 : 1 000h ? 8 : 2 000h 1 000h leakage current not more than specifed value not more than specifed value not more than specifed value not more than specifed value capacity change within 50% of initial value within 20% of initial value (4v : 30%) within 20% of initial value within 20% of initial value (4v : 30%) dissipation factor not more than 300% of specifed value not more than 200% of specifed value not more than 200% of specifed value not more than 200% of specifed value condition: applied voltage applied current applied temperature failure rate level u r i r 85c 1% failure rate u r i r 85c guaranteed u r i r = 0 85c u r = 0 i r = 0 85c after test: u r to be applied for 30min >24h before measurement frequency 50hz 120hz 300hz 1khz 10khz~ coeffcient 0,70 1,00 1,17 1,36 1,50 temperature +70c +85c coeffcient 1,20 1,00 multiplier for ripple current frequency coeffcient temperature coeffcient smd cd vs bs cd vh vh cd vz vz lower esr 105c direct contact & support: jianghai europe gmbh +49 (0)2151-652088-0 info@jianghai-europe.com www.jianghai-europe.com v2006.2
1 cd vs bs series ratings for cd vs bs series v dc code rated capacitance max esr 20c, 120hz max ripple current 85c, 120hz size ? d x l (v) (f) () (marms) (mm) 4 0g 33 15,3 26 4 x 5,4 47 10,8 34 4 x 5,4 56 9,0 39 4 x 5,4 68 7,5 45 5 x 5,4 100 5,1 61 5 x 5,4 150 3,4 74 6,3 x 5,4 220 2,3 82 6,3 x 5,4 330 1,6 150 6,3 x 7,7 470 1,1 150 6,3 x 7,7 680 0,74 300 8 x 10,5 1 000 0,50 330 8 x 10,5 1 500 0,34 450 10 x 10,5 2 200 0,23 480 10 x 10,5 6,3 0j 22 16,9 31 4 x 5,4 33 11,3 31 4 x 5,4 11,3 39 5 x 5,4 47 8,0 36 4 x 5,4 8,0 47 5 x 5,4 56 6,7 46 5 x 5,4 68 5,5 52 5 x 5,4 5,5 62 6,3 x 5,4 100 3,8 55 5 x 5,4 3,8 71 6,3 x 5,4 150 2,5 78 6,3 x 5,4 220 1,7 95 6,3 x 5,4 330 1,2 150 6,3 x 5,4 470 0,80 300 8 x 10,5 680 0,55 300 8 x 10,5 1 000 0,37 330 8 x 10,5 0,37 430 10 x 10,5 1 500 0,25 450 10 x 10,5 10 1a 22 13,3 28 4 x 5,4 13,3 35 5 x 5,4 33 8,9 32 4 x 5,4 8,9 43 5 x 5,4 47 6,3 43 5 x 5,4 6,3 59 6,3 x 5,4 56 5,3 57 6,3 x 5,4 68 4,3 72 6,3 x 5,4 100 3,0 76 6,3 x 5,4 150 2,0 88 6,3 x 5,4 220 1,4 150 6,3 x 7,7 330 0,88 280 8 x 10,5 470 0,62 300 8 x 10,5 680 0,43 380 10 x 10,5 1 000 0,29 450 10 x 10,5 16 1c 10 23,9 25 4 x 5,4 15 16,0 28 4 x 5,4 22 10,9 28 4 x 5,4 10,9 39 5 x 5,4 33 7,3 40 5 x 5,4 7,3 57 6,3 x 5,4 47 5,1 44 5 x 5,4 5,1 68 6,3 x 5,4 56 4,3 74 6,3 x 5,4 68 3,6 80 6,3 x 5,4 100 2,4 86 6,3 x 5,4 150 1,6 135 6,3 x 7,7 220 1,1 150 6,3 x 7,7 1,1 215 8 x 10,5 330 0,72 280 8 x 10,5 470 0,51 330 8 x 10,5 0,51 420 10 x 10,5 680 0,35 450 10 x 10,5 1 000 0,24 490 10 x 10,5 25 1e 4,7 39,6 19 4 x 5,4 10 18,6 20 4 x 5,4 18,6 28 5 x 5,4 15 12,4 34 5 x 5,4 22 8,5 35 5 x 5,4 8,5 52 6,3 x 5,4 33 5,7 42 5 x 5,4 5,7 63 6,3 x 5,4 47 4,0 68 6,3 x 5,4 56 3,4 82 6,3 x 5,4 68 2,8 94 6,3 x 5,4 v dc code rated capacitance max esr 20c, 120hz max ripple current 85c, 120hz size ? d x l (v) (f) () (marms) (mm) 25 1e 100 1,9 130 6,3 x 7,7 150 1,3 200 8 x 10,5 220 0,84 250 8 x 10,5 330 0,56 310 8 x 10,5 0,56 340 10 x 10,5 470 0,4 400 10 x 10,5 35 1v 3,3 48,3 18 4 x 5,4 4,7 33,9 20 4 x 5,4 10 16,0 20 4 x 5,4 16,0 30 5 x 5,4 22 7,3 54 6,3 x 5,4 33 4,4 60 6,3 x 5,4 47 3,4 70 6,3 x 5,4 56 2,9 80 6,3 x 7,7 68 2,4 110 6,3 x 7,7 100 1,6 120 6,3 x 7,7 1,6 175 8 x 10,5 150 1,1 220 8 x 10,5 220 0,72 270 8 x 10,5 0,72 310 10 x 10,5 330 0,48 350 10 x 10,5 470 0,34 400 10 x 10,5 50 1h 0,1 1 500 1 4 x 5,4 0,22 700 2,3 4 x 5,4 0,33 460 3,5 4 x 5,4 0,47 325 5 4 x 5,4 1 150 10 4 x 5,4 1,5 100 12 4 x 5,4 2,2 70,0 15 4 x 5,4 3,3 46,3 18 4 x 5,4 4,7 32,5 19 4 x 5,4 32,5 23 5 x 5,4 10 15,3 34 6,3 x 5,4 22 7,0 60 6,3 x 5,4 33 4,7 85 6,3 x 7,7 47 3,3 90 6,3 x 7,7 56 2,8 110 6,3 x 7,7 68 2,3 170 8 x 10,5 100 1,6 200 8 x 10,5 150 1,1 240 10 x 10,5 220 0,69 320 10 x 10,5 63 1j 0,1 1 330 1 4 x 5,4 0,22 600 2,3 4 x 5,4 0,33 400 3,5 4 x 5,4 0,47 285 5 4 x 5,4 1 135 10 4 x 5,4 1,5 90,0 12 4 x 5,4 2,2 60,0 15 4 x 5,4 3,3 40,0 20 5 x 5,4 4,7 30,0 23 5 x 5,4 30,0 30 6,3 x 5,4 10 13,3 34 6,3 x 5,4 13,3 55 6,3 x 7,7 22 6,1 70 6,3 x 7,7 6,1 140 8 x 10,5 33 4,1 160 8 x 10,5 47 2,9 170 8 x 10,5 2,9 230 10 x 10,5 56 2,4 250 10 x 10,5 68 2,0 260 10 x 10,5 100 1,4 280 10 x 10,5 100 2a 1 126 10 4 x 5,4 1,5 85,0 15 6,3 x 5,4 2,2 58,0 20 6,3 x 5,4 3,3 39,0 28 6,3 x 5,4 39,0 45 6,3 x 7,7 4,7 27,0 30 6,3 x 5,4 27,0 50 6,3 x 7,7 10 12,7 50 6,3 x 7,7 12,7 110 8 x 10,5 22 5,8 120 8 x 10,5 5,8 180 10 x 10,5 33 3,9 190 10 x 10,5 47 2,7 200 10 x 10,5 custom products are available on request. smd direct contact & support: jianghai europe gmbh +49 (0)2151-652088-0 info@jianghai-europe.com www.jianghai-europe.com v2006.2
8 part number system ec r 1c pt 101 m ff 2 0611 je xxxxx technology terminal type rated voltage code series code capacitance code (in f) capacitance tolerance lead form terminal/ pitch size dimension for specials only ec = electrolytic capacitor smd = v for coding please refer to the pages of ratings cd vs = bs 0,47 = r47 20% = m smd: 4x7 = 0407 radial = r cd vh = vh 1,0 = 010 10% = k taped = ff terminal = t2 5x11,5 = 0511 pc = polymer capacitor snap-in = s cd vz = vz 2,2 = 2r2 +30 / -10% = q radial: 6,3x11,5 = 0611 cd 261 = lk 100 = 101 +50 / -10% = t long lead = ll 2,0mm = 20 35x80 = 3580 cd 261x = qx 1 000 = 102 cut 5,0mm = cb 2,5mm = 25 45x100 = 45100 cd 262 = qm 10 000 = 103 cut , mm = cc 3,5mm = 35 cd 26 = bk cut 4,0mm = cd 5,0mm = 50 cd 269 = ph cut 3,5mm = ce 7,5mm = 75 cd 281 = ll cut 3,0mm = cf 10,0mm = 10 cd 28 = xy on request: alternative lead forms (axial, 90 - angle, others) 12,5mm = 12 cd 287 = gc cd 28l = ql snap-in: cd 29 = bz 4,0mm pin length = t4 2 pin = p2 cd 29 = bw 6, mm pin length = t6 3 pin = p3 cd 29 = bc soldering pin = s4 4 pin = p4 cd 296 = kc 5 pin = p5 cd 297 = bb preferred cd 299 = pg cd 29d = hr cd 29h = qh cd 29l = ql hcp = cp hpm = pm hvc = vc order code smd, radial, snap-in technical specifcation smd type dimensions ? d x l x , x , 6, x , 6, x 7,7 8 x 10, 8 x 11,8 10x10, 10x12,7 a 1,8 2,1 2,4 2,5 2,9 2,9 3,2 3,2 b 4,3 5,3 6,6 6,6 8,3 8,4 10,3 10,4 c 4,3 5,3 6,6 6,6 8,3 8,4 10,3 10,4 e 1,0 1,3 2,2 2,2 3,1 3,1 4,5 4,5 l 5,4 5,4 5,4 7,7 10,5 11,8 10,5 12,7 w 0,5 - 0,8 0,7 - 1,1 in mm size (dxl) w 0, a 0,2 b 0,2 p 0,1 t2 0,2 f 0,1 t1 0,1 4 x 5,4 12,0 5,0 5,0 8,0 5,8 5,5 0,4 5 x 5,4 12,0 6,0 6,0 12,0 5,8 5,5 0,4 6,3 x 5,4 16,0 7,0 7,0 12,0 5,8 7,5 0,4 6,3 x 7,7 16,0 7,0 7,0 12,0 8,4 7,5 0,4 8 x 10,5 24,0 8,7 8,7 16,0 11,0 11,5 0,5 8 x 11,8 24,0 8,7 8,7 16,0 12,3 11,5 0,5 10 x 10,5 24,0 10,7 10,7 16,0 11,0 11,5 0,5 10 x 12,7 24,0 10,7 10,7 16,0 14,0 11,5 0,5 in mm taping dimensions diameter w d 4; 5 14 1 50 1 6,3 18 1 50 1 8; 10 25 1 50 1 polymer 25 1 80 1 in mm for more details or soldering profles of radials or polymer-capacitors please contact our local sales offces. allowable range of peak temperature size t (c) t (second) t 1 (second) ? 4 ~ 6,3 250 90 40 ? 8 x 10,5 240 90 30 ? 10 x 10,5 235 60 30 soldering profle (aluminium electrolytic capacitors) direct contact & support: jianghai europe gmbh +49 (0)2151-652088-0 info@jianghai-europe.com www.jianghai-europe.com v2006.2
|